Request a Quote

Sandblast Hose Coupling – Threaded Pot Ends – Aluminum – Sandblast Hose Coupling

sandblast hose couplings threaded pot ends

    Type

    NPT

    Product Category

    Industries

    Branding

    Jason

    Construction

    Aluminum

    WARNING! Brass should never be exposed to use of any materials containing ammonia due to susceptibility of brass for stress corrosion cracking. This attack can cause sudden and catastrophic failure leading to property damage, injury, or death.

    Select up to five items from the table below to compare or request a quote.

    Product Sizes

    Request For Quote

    Item # SB1A

    Coupling Description

    There are three active sandblast system Coupling; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.

    Thread Size

    1-1/4"

    Item # SB10A

    Coupling Description

    There are three active sandblast system Coupling; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.

    Thread Size

    1-1/4"

    Item # SB2A

    Coupling Description

    There are three active sandblast system Coupling; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.

    Thread Size

    1-1/2"

    Item # SB20A

    Coupling Description

    There are three active sandblast system Coupling; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.

    Thread Size

    1-1/2"

    sandblast hose couplings threaded pot ends

    Sandblast Hose Coupling – Threaded Pot Ends – Aluminum – Sandblast Hose Coupling

    WARNING! Brass should never be exposed to use of any materials containing ammonia due to susceptibility of brass for stress corrosion cracking. This attack can cause sudden and catastrophic failure leading to property damage, injury, or death.

    Item #Dash SizeID (inch)ID (mm)OD (inch)OD (mm)Ply ReinforcementWP PSIBurst PressureVacuumBend RadiusWeightLength
    SB1A
    SB10A
    SB2A
    SB20A