Request a Quote

Sandblast Hose Coupling – Nozzle Holders – Aluminum – Sandblast Hose Coupling

sandblast hose couplings nozzle holders

    Product Category

    Industries

    Construction

    Aluminum

    WARNING! Brass should never be exposed to use of any materials containing ammonia due to susceptibility of brass for stress corrosion cracking. This attack can cause sudden and catastrophic failure leading to property damage, injury, or death.

    Select up to five items from the table below to compare or request a quote.

    Product Sizes

    Request For Quote

    Item # NH1A

    Inside Diameter (Imperial)

    3/4"

    Outside Diameter (Imperial)

    1-1/2"

    Coupling Description

    There are three active sandblast system Coupling; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.

    Item # NH2A

    Inside Diameter (Imperial)

    1"

    Outside Diameter (Imperial)

    1-7/8"

    Coupling Description

    There are three active sandblast system Coupling; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.

    Item # NH3A

    Inside Diameter (Imperial)

    1-1/4"

    Outside Diameter (Imperial)

    2-5/32"

    Coupling Description

    There are three active sandblast system Coupling; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.

    Item # NH4A

    Inside Diameter (Imperial)

    1-1/2"

    Outside Diameter (Imperial)

    2-3/8"

    Coupling Description

    There are three active sandblast system Coupling; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.

    sandblast hose couplings nozzle holders

    Sandblast Hose Coupling – Nozzle Holders – Aluminum – Sandblast Hose Coupling

    WARNING! Brass should never be exposed to use of any materials containing ammonia due to susceptibility of brass for stress corrosion cracking. This attack can cause sudden and catastrophic failure leading to property damage, injury, or death.

    Item #Dash SizeID (inch)ID (mm)OD (inch)OD (mm)Ply ReinforcementWP PSIBurst PressureVacuumBend RadiusWeightLength
    NH1A3/4"1-1/2"
    NH2A1"1-7/8"
    NH3A1-1/4"2-5/32"
    NH4A1-1/2"2-3/8"