Request a Quote

Sandblast Hose Coupling – Hose Ends – Quick End Brass – Sandblast Hose Coupling

sandblast hose couplings hose ends

    Product Category

    Industries

    Construction

    Quick End Brass

    WARNING! Brass should never be exposed to use of any materials containing ammonia due to susceptibility of brass for stress corrosion cracking. This attack can cause sudden and catastrophic failure leading to property damage, injury, or death.

    Select up to five items from the table below to compare or request a quote.

    Product Sizes

    Request For Quote

    Item # Q1B

    Inside Diameter (Imperial)

    3/4"

    Outside Diameter (Imperial)

    1-1/2"

    Coupling Description

    There are three active sandblast system Coupling; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.

    Item # Q2B

    Inside Diameter (Imperial)

    1"

    Outside Diameter (Imperial)

    1-7/8"

    Coupling Description

    There are three active sandblast system Coupling; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.

    Item # Q3B

    Inside Diameter (Imperial)

    1-1/4"

    Outside Diameter (Imperial)

    2-5/32"

    Coupling Description

    There are three active sandblast system Coupling; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.

    Item # Q4B

    Inside Diameter (Imperial)

    1-1/2"

    Outside Diameter (Imperial)

    2-3/8"

    Coupling Description

    There are three active sandblast system Coupling; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.

    sandblast hose couplings hose ends

    Sandblast Hose Coupling – Hose Ends – Quick End Brass – Sandblast Hose Coupling

    WARNING! Brass should never be exposed to use of any materials containing ammonia due to susceptibility of brass for stress corrosion cracking. This attack can cause sudden and catastrophic failure leading to property damage, injury, or death.

    Item #Dash SizeID (inch)ID (mm)OD (inch)OD (mm)Ply ReinforcementWP PSIBurst PressureVacuumBend RadiusWeightLength
    Q1B3/4"1-1/2"
    Q2B1"1-7/8"
    Q3B1-1/4"2-5/32"
    Q4B1-1/2"2-3/8"